If your vehicle leaks fluids or you spill some while filling your vehicle, lawn mower or snow blower, your driveway may end up with a stain or 2. Fluids such as oil, transmission fluid and gasoline can leave a stain on paved driveways and garage floorings. Because these liquids are all different, cleaning techniques differ somewhat from fluid to fluid and surface to surface.

Whether the stain is brand-new or old, there are some standard actions to assist eliminate marks left by leaked fluids from a paved driveway or an uncoated concrete garage flooring.

The Best Ways To Get Rid Of Oil Stains from Your Driveway

Oil can leave a dark stain on your pavement. Here are some actions to help get rid of those persistent oil spots from your driveway.

Figure out whether the fluid is wet or dry.

If the spill is new, start by covering the stain with cat litter, cornstarch, baking soda or cornmeal, which might help absorb the additional wetness.

Once the pavement is dry, or if the stain was already dry, wet the stain with water and scrub with a stiff brush and a paste made from baking soda and water.

Wash the pavement with a hose and let it air dry.

If the oil spill is new, start by covering the stain with cat litter, cornstarch, baking soda or cornmeal, which might help soak up the additional wetness.

To get rid of dried oil from concrete, splash the stain with spray lube and after that rinse with water.

Another approach, is to put engine degreaser on the stain and scrub it with a wire brush, then cover with kitty litter prior to sweeping it up.

The Best Ways To Eliminate Transmission Fluid Spots from Your Driveway

Transmission fluid spills or leaks may leave a bright red stain on light-coloured concrete.

Here are some recommended steps for eliminating the stain:

Spray the stain with oven cleaner and let it sit for 10 minutes.

Use a stiff brush to scrub the spot and wash with a hose at its highest pressure.

If the stain is still there, repeat the process.

How to Remove Gasoline Stains from Your Driveway

Spilled gas not only leaves stains on your paved driveway; the marks are most likely accompanied by an odour you’ll want to neutralise.

Put on protective gloves and goggles.

Soak a fresh gas spill with feline litter, baking soda or commercial absorbents.

Sweep the stained litter or absorbent into a coffee can with a lid. Talk to your local fire department about the best ways to effectively deal with it.

Scrub the stain with a mix of dishwasher liquid and water.

Let it soak in for a couple of minutes prior to washing with a hose.

If that doesn’t take care of the problem, we recommend purchasing trisodium phosphate from a hardware store, mixing it with warm water and scrubbing the spill with the option till the stain lightens.

Those spilled fluids might be unsightly, however they may not be long-term. If the cleansing suggestions laid out above do not totally eliminate the stain, you might wish to think about an expert cleaner to do the task.